Der Roland JP-8000 hat mit seinem einzigartigen Supersaw-Oszillator im Jahr 1996 die elektronische Musikwelt für immer verändert. Dieser extrem breite, schwebende Sound ist bis heute absoluter Kult. Doch viele digitale Nachbildungen im Netz klingen dünn, statisch oder kämpfen mit digitalem Kratzen (Aliasing).
Nach wochenlanger DSP-Entwicklung im Korg Logue-SDK ist es so weit: Ich habe den mathematischen Code des JP-8000 analysiert und eine echte, kompromisslose Emulation für die digitale Multi-Engine von Korg geschaffen. Hier arbeitet kein einfaches Sample, sondern echter, lebendiger Code, der deine Korg-Hardware in eine Supersaw-Trance-Maschine verwandelt!
Lade dir die kostenlose Demo-Version des Supersaw-Oszillators herunter und teste den Sound direkt auf deiner Hardware (Oszillator blendet nach 40 Sek. aus).
Was macht diesen Oszillator so besonders? Ein Blick unter die Haube:
Dieser Oszillator wurde von Grund auf effizient und klanglich kompromisslos in C++ geschrieben. Statt Standard-Sägezähne übereinanderzulegen, nutzt der Code mathematische Finessen, die man sonst nur von High-End-Plug-ins kennt:
Das originale Detune-Verhalten: Der Oszillator berechnet das Phasenverhalten von 7 synchronen Sägezähnen mit den exakten, asymmetrischen Detune-Verhältnissen des originalen Roland JP-8000.
Vollständig Bandbreiten-begrenzt: Durch den Einsatz von optimierten, bandbegrenzten Sägezahn-Algorithmen bleibt der Sound selbst in den höchsten Tönen absolut sauber und frei von störendem Aliasing.
Analog moduliertes Filter-Design: Im Code arbeitet eine Kaskade aus vier Highpass-Filtern sowie ein spezialisierter High-Shelf-EQ basierend auf BiQuad-Filterstrukturen. Das sorgt für einen extrem aufgeräumten Bassbereich und seidige Höhen.
Echtes Softclipping: Ein integrierter Sättigungs-Algorithmus sorgt dafür, dass der Oszillator bei höherem Pegel harmonisch und warm in die Sättigung fährt – exakt wie hochwertige analoge Übertrager.
Die Parameter: Volle Kontrolle am KORG Synthesizer
Du kannst den Sound direkt über die Regler deines Korg-Synthesizers (oder via MIDI/LFO) extrem tiefgreifend formen:
SHAPE / LFO (Detune): Regelt das Schwebungsverhalten der 7 Sägezähne – von subtil analog bis hin zum maximal breiten „Wall of Sound“.
ID1 (Phase / Free-Running): Schaltet stufenlos zwischen Vollem Retrigger (Phasen starten bei jedem Tastendruck bei 0 für maximalen Punch bei knackigen Leads) und Free-Running (Phasen laufen frei für organische, lebendige Pads).
ID2 (Mix): Balance-Regler zwischen dem Center-Oszillator und den detunten Side-Saws.
ID3 & ID4 (Sub Mix & Sub Octave): Mischt einen massiven Sub-Oszillator hinzu (wahlweise eine oder zwei Oktaven tiefer), um deinen Leads ein unerschütterliches Fundament zu geben.
ID5 (Drive): Schiebt das interne Gain-Staging an und treibt den Oszillator in das musikalische Softclipping.
ID6 (Brightness): Ein genialer Kombi-Regler. Er öffnet den High-Shelf-EQ für brillante Höhen (bis zu +15 dB) und schiebt gleichzeitig die Grenzfrequenz der Highpass-Filter nach oben, um den Sound im Mix perfekt zu platzieren.
Das Ultimative Multi-Engine Bundle (1+15 Gratis)
Die JP-8000 Emulation ist das absolute Prunkstück – aber du bekommst noch viel mehr. Um dir die volle Palette an klanglichen Möglichkeiten zu bieten, erhältst du beim Kauf dieses Bundles 15 zusätzliche User-Oszillatoren komplett gratis dazu!
Plattformen: Volle Kompatibilität mit Korg Minilogue XD, Prologue und NTS-1 (MKI). Die mathematischen Core-Funktionen laufen dank binärkompatiblem SDK auf allen drei Geräten identisch.
Preis: Nur 15,— € (Das ist weniger als 1 Euro pro Oszillator!)
Lieferumfang: .mnlgxdunit, .prlgunit und .nt1unit Dateien inklusive Kurzanleitung.
The Roland JP-8000 forever changed the world of electronic music in 1996 with its unique Supersaw oscillator. This extremely wide, floating sound remains absolute cult to this day. Yet many digital recreations online sound thin, static, or struggle with digital aliasing.
After weeks of DSP development in the Korg Logue-SDK, the time has come: I analyzed the mathematical code of the JP-8000 and created a true, uncompromising emulation for the digital Multi-Engine of Korg. This is no simple sample – it is real, living code that transforms your Korg hardware into a Supersaw trance machine!
What makes this oscillator so special? A look under the hood:
This oscillator was written from the ground up in C++ for maximum efficiency and sonic uncompromising quality. Instead of simply stacking standard sawtooth waves, the code uses mathematical refinements otherwise found only in high-end plugins:
Original detune behavior: The oscillator calculates the phase behavior of 7 synchronized sawtooths using the exact asymmetric detune ratios of the original Roland JP-8000.
Fully band-limited: By employing optimized band-limited sawtooth algorithms, the sound stays absolutely clean and free of annoying aliasing even in the highest notes.
Analog-modulated filter design: Inside the code runs a cascade of four highpass filters plus a specialized high-shelf EQ based on BiQuad filter structures. This delivers an extremely clean bass range and silky highs.
True soft clipping: An integrated saturation algorithm ensures that the oscillator moves into harmonic, warm saturation at higher levels – exactly like high-quality analog transformers.
The Parameters: Full control on your KORG synthesizer
You can shape the sound deeply and directly via the knobs of your Korg synthesizer (or via MIDI/LFO):
SHAPE / LFO (Detune): Controls the beating behavior of the 7 sawtooths – from subtle analog to the maximum wide “Wall of Sound”.
ID1 (Phase / Free-Running): Continuously switches between full retrigger (phases start at 0 with every key press for maximum punch on snappy leads) and free-running (phases run freely for organic, lively pads).
ID2 (Mix): Balance control between the center oscillator and the detuned side saws.
ID3 & ID4 (Sub Mix & Sub Octave): Mixes in a massive sub oscillator (optionally one or two octaves lower) to give your leads an unshakable foundation.
ID5 (Drive): Pushes the internal gain staging and drives the oscillator into musical soft clipping.
ID6 (Brightness): A brilliant dual-purpose control. It opens the high-shelf EQ for brilliant highs (up to +15 dB) while simultaneously raising the cutoff frequency of the highpass filters to place the sound perfectly in the mix.
The Ultimate Multi-Engine Bundle (1+15 Free)
The JP-8000 emulation is the absolute centerpiece – but you get much more. To give you the full range of sonic possibilities, you receive 15 additional user oscillators completely free with the purchase of this bundle!
Platforms: Full compatibility with Korg Minilogue XD, Prologue and NTS-1 (MKI). Thanks to the binary-compatible SDK, the mathematical core functions run identically on all three devices.
Price: Only €15,— (that’s less than 1 euro per oscillator!)
Delivery: .mnlgxdunit, .prlgunit and .nt1unit files including quick start guide.
Der ultimative Roland JP-8000 Supersaw für Korg Minilogue XD, Prologue & NTS-1!
Der Roland JP-8000 hat mit seinem einzigartigen Supersaw-Oszillator im Jahr 1996 die elektronische Musikwelt für immer verändert. Dieser extrem breite, schwebende Sound ist bis heute absoluter Kult. Doch viele digitale Nachbildungen im Netz klingen dünn, statisch oder kämpfen mit digitalem Kratzen (Aliasing).
Nach wochenlanger DSP-Entwicklung im Korg Logue-SDK ist es so weit: Ich habe den mathematischen Code des JP-8000 analysiert und eine echte, kompromisslose Emulation für die digitale Multi-Engine von Korg geschaffen. Hier arbeitet kein einfaches Sample, sondern echter, lebendiger Code, der deine Korg-Hardware in eine Supersaw-Trance-Maschine verwandelt!
15,00 €In den Warenkorb
💡 Erst testen, dann kaufen!
Lade dir die kostenlose Demo-Version des Supersaw-Oszillators herunter und teste den Sound direkt auf deiner Hardware (Oszillator blendet nach 40 Sek. aus).
Kostenlose Demo anfordern
Was macht diesen Oszillator so besonders? Ein Blick unter die Haube:
Dieser Oszillator wurde von Grund auf effizient und klanglich kompromisslos in C++ geschrieben. Statt Standard-Sägezähne übereinanderzulegen, nutzt der Code mathematische Finessen, die man sonst nur von High-End-Plug-ins kennt:
Die Parameter: Volle Kontrolle am KORG Synthesizer
Du kannst den Sound direkt über die Regler deines Korg-Synthesizers (oder via MIDI/LFO) extrem tiefgreifend formen:
Das Ultimative Multi-Engine Bundle (1+15 Gratis)
Die JP-8000 Emulation ist das absolute Prunkstück – aber du bekommst noch viel mehr. Um dir die volle Palette an klanglichen Möglichkeiten zu bieten, erhältst du beim Kauf dieses Bundles 15 zusätzliche User-Oszillatoren komplett gratis dazu!
15,00 €In den Warenkorb
Mehr Software von Synthmania: Schau dir auch den Behringer JT-4000 VST/Standalone Editor an!
The Roland JP-8000 forever changed the world of electronic music in 1996 with its unique Supersaw oscillator. This extremely wide, floating sound remains absolute cult to this day. Yet many digital recreations online sound thin, static, or struggle with digital aliasing.
After weeks of DSP development in the Korg Logue-SDK, the time has come: I analyzed the mathematical code of the JP-8000 and created a true, uncompromising emulation for the digital Multi-Engine of Korg. This is no simple sample – it is real, living code that transforms your Korg hardware into a Supersaw trance machine!
15,00 €In den Warenkorb
💡 Try before buy!
Download the free Demo version of the Supersaw Oscillator and test the sound directly on your Korg hardware (oscillator fades out after 40 seconds).
Get the free Demo
💫 Also own the Behringer JT-4000 Micro?
Control your synth comfortably right from your DAW with my custom MIDI Editor.
Check out the JT-4000 Editor (3.90 €) →
What makes this oscillator so special? A look under the hood:
This oscillator was written from the ground up in C++ for maximum efficiency and sonic uncompromising quality. Instead of simply stacking standard sawtooth waves, the code uses mathematical refinements otherwise found only in high-end plugins:
The Parameters: Full control on your KORG synthesizer
You can shape the sound deeply and directly via the knobs of your Korg synthesizer (or via MIDI/LFO):
The Ultimate Multi-Engine Bundle (1+15 Free)
The JP-8000 emulation is the absolute centerpiece – but you get much more. To give you the full range of sonic possibilities, you receive 15 additional user oscillators completely free with the purchase of this bundle!
15,00 €In den Warenkorb